A Birchbark company - serving Ventura, CA

Owens Corning Roofing Company Nationwide

Owens CorningOwens Corning
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Owens Corning Roofing Company in Ventura: What to Know First

If you own an Owens Corning roof in Ventura and need a roofing company, Birchbark Roofing Ventura repairs and replaces Owens Corning systems with a written price before any work starts. Most Owens Corning repairs in Ventura take one visit, and you’ll know the exact dollar figure before we touch your roof. We’re an independent Owens Corning service provider, which means we answer to you, not to a manufacturer’s sales quota.

Call (350) 240-5534

Erik Lindgren and our crew have worked on Owens Corning shingle systems throughout Ventura for years, from the craftsman homes in Midtown to the newer builds up in the hills. If you’re seeing granule loss, a leak near flashing, or ridge cap lifting after a coastal wind season, call (350) 240-5534 and a live person answers, any hour.

How Owens Corning Products Fail – and How We Fix Them

  • Duration Series granule loss near the eaves. Ventura’s marine layer keeps roofs damp longer than inland cities, and Owens Corning Duration shingles can shed granules where morning fog sits heaviest on the lower roof plane. We see this most on north-facing slopes in Midtown. The fix is usually localized shingle replacement before the mat underlying the granules starts absorbing UV. If caught early, we replace the affected courses and the roof keeps its warranty posture.
  • TruDefinition color variation across batches. Owens Corning’s TruDefinition color blends are made to be mixed on the roof, but homes near Ventura’s coast get a specific kind of staining from salt air that makes patch jobs obvious if the replacement bundles aren’t distributed correctly. Our technicians pull shingles from multiple bundles when doing a repair so the blend matches, which smaller crews often skip.
  • Oakridge series sealant failure in high wind. The sealant strip on Owens Corning Oakridge shingles can lose adhesion after repeated hot-then-foggy cycles, and Ventura’s fall Santa Ana winds find those unsealed tabs fast. A lifted tab is not just cosmetic; it lets water drive sideways under the shingle. We re-seal lifted tabs and replace any that have cracked at the nail line.
  • VentSure ridge vent pulled loose by coastal gusts. Ventura’s ridgelines take constant wind from the ocean, and Owens Corning VentSure ridge vents can work loose when the nails back out over time. The symptom is often a faint rattle or a musty smell in the attic before visible water stains. We re-anchor the vent and replace the shingle caps over it, checking that the vent slot underneath is actually cut wide enough to do its job.
  • Decking rot hidden under Owens Corning underlayment. In older Ventura homes where Owens Corning felt or synthetic underlayment was installed over plywood decking, we find rot at the seams when the underlayment wasn’t lapped correctly for coastal moisture. The underlayment fails slowly, and by the time a leak shows inside, the deck section is soft. We replace the deck boards, re-lay underlayment with proper overlap, and re-shingle the affected plane.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Owens Corning Roofing Company Process

  1. 1
    You call, a person answers. No phone tree. We schedule a visit and note anything you’ve already spotted, like stains on the ceiling or shingle grit gathering in the gutters.
  2. 2
    We inspect the roof and attic. We look at the Owens Corning surface layer, the underlayment, the flashing points, and the attic side of the decking. You get a plain-English explanation of what is failing and why, not a sales pitch.
  3. 3
    You get a written price. Before any work begins, we hand you a line-item scope with the exact dollar amount. No allowances, no open-ended time-and-materials surprise at the end.
  4. 4
    We do the work with the house protected. Shoe covers at the door, drop cloths through the hallway, tarps over landscaping where the debris path runs, and pet-safe products where there’s a choice. If your dog needs to stay inside during the job, we coordinate the door schedule with you.
  5. 5
    We test the repair or replacement. For repairs, we water-test the affected area. For replacements, we walk the full roof plane and check every flashing transition before we call it done.
  6. 6
    You get a photo of the clean-up. Before the crew leaves, we photograph the cleaned-up site and send it to you. Every job is covered by our 365-Day Done Right Promise: if the work isn’t right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Owens Corning Roofing Company Costs in Ventura

Most Owens Corning roof repairs in Ventura run between $350 and $900 depending on what’s failing. A single-location leak repair with shingle replacement at a pipe flashing typically lands around $400 to $650. Replacing a section of ridge cap or a few lifted tabs sits closer to $350 to $500. If decking rot is involved and we need to cut out and replace a sheet of plywood, expect $700 to $1,400 for that scope. A full Owens Corning roof replacement on a typical Ventura home runs from $11,000 to $22,000 depending on roof pitch, story count, deck condition, and which Owens Corning line you choose.

What moves the price: roof slope (steeper is slower and costs more), how many layers need to come off, and whether underlying decking or flashing needs replacement. You’ll see your exact number in writing before we start. Call (350) 240-5534 for a free estimate, no pressure and no obligation.

Why Ventura Homeowners Call Birchbark Roofing Ventura for Owens Corning Work

Erik Lindgren grew up in Los Angeles and learned roofing through the construction program at Los Angeles Trade-Technical College before spending the better part of three decades working roofs up and down the California coast. He and our crew have been serving Ventura for years, including plenty of jobs in Midtown near the old mission, where older craftsman homes and coastal weather keep a roofer honest.

We are part of the Cedarwell family of independent roofing businesses since 2000, and every job carries the Cedarwell Care Promise: Clean up like it’s our own home; Ask before we move or touch anything; Respect the family’s time and quiet hours; Explain the price before the work. If a repair or replacement isn’t done right, our 365-Day Done Right Promise means we come back and make it right, no argument and no invoice. And because we also work with GAF and CertainTeed systems, we can give you an honest comparison if your Owens Corning roof is at the point where replacement makes more sense than another repair.

FAQs

Need Roofing help in Ventura? Licensed & insured · Free in-home estimates response · free estimates
Call (350) 240-5534
Local Service Coverage

Request a Free Estimate in Ventura

Tell us what you need - Birchbark Roofing Ventura responds fast. No obligation.

By sending this request, you accept our Privacy Policy and consent to being contacted via phone, email, or SMS about your service request, including from the local pros who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch